Drivers Qhy Ccd



  1. Qhyccd Polemaster Drivers
  2. Qhy Ccd Drivers
  3. Drivers Qhy Ccd Cameras
  4. Drivers Qhy Ccd
  • The QHY PoleMaster is the perfect accessory for your system. Check out its features: Accuracy: Your best polar alignment can now be achieved in the order of a maximum 30-arcsecond range. Wide-angle view: Its wide field-of-view (11 x 8 degrees) makes it very easy to locate the pole star.
  • QHY290C Cooled Back-Illuminated CMOS Astronomy Camera The QHY290C is a cooled USB 3.0 color imaging camera that is great for both planetary and deep sky. The 290C sports the back-illuminated Sony STARVIS Exmor-R IMX290 CMOS sensor, with small 2.9um pi.
  • To do that, I have uninstalled and reinstalled all drivers from qhyccd.com work. So far, I only find these drivers to work. For those who have same difficulty like me may want to use these drivers which can be downloaded from: QHY CCD software Download. Take note to download the QHY5 update driver as well. And you must also use the QHY5 ASCOM.

The QHY8 CCD Camera is what's hanging off on the lower-right. I taped the 3 connected wires to the drawtube to provide strain relief. See my Equipment Page for more pictures and details.

This page talks about the QHY8 CCD camera and workflow. Pictures from the camera are are here. I acquired the QHY8 CCD camera in Sept 2008. (I have the version sold by Starzonia. Beware that there are multiple versions of this camera sold by vendors world-wide, so your camera may well be different than mine). More info about Processing Astrophotos is here. My main Astronomy and Camera Equipment page is here.

Update network card driver.
QHY8 Example: Christmas Tree Cluster & Cone Nebula Area

Driver Downloads. This is where you can get drivers for your astronomy instruments and devices. The links along the left side lead to the drivers for each device type. Note: Do not rename downloaded drivers, this may defeat backward compatibility features and might prevent your driver from installing. If you receive a message that 'Platform 5.

My Image Processing Workflow with the QHY8

I am using the recommended workflow in Nebulosity and then use Registar and Photoshop:

  • Capture in Raw (using 5 minute sub exposures)

  • Apply a Bad Pixel Map

  • Apply a Flat and Bias

  • Demosaic each image

  • Covert to Tiff format

  • Stack using Registar

  • Process in Photoshop

  • When using a H-alpha filter, I use the channel mixer to turn the image to monochrome using only the red channel. (See more info on narrowband filtering with this camera at the bottom of my Narrowband Imaging page.)

  • May, 2010: I sometimes use Deep Sky Stacker, Drizzle Image Processing, and AIP4Win's deconvolution filter to enhance the detail in the dust lane area.

Backfocus Info below. The distance shown as 7mm is should really be 7.8mm. What it means for my TOA 130 is that from the camera body to the end of the adapters I should have 13mm plus 35 mm distance = 48mm minus that .8 = 47.2 mm. I'm getting 45 and 49mm with two adapters.

Driver and Software Discussion: As of 4/2010 I am doing well with a new set of drivers from the QHY8 downloads web site and Nebulosity 2.2.4.!

[2015: Links removed as qyyccd is now listed as a compromised site.] As of 1/2010 I have killed the old QHY8 ('Tom's Drivers') in favor of the drivers from the QHY8 downloads web site. See this discussion about how to remove old drivers first! I also upgraded to Nebulosity v2.2.1. It looks like a few annoying things might be fixed, like the inability to zoom in on an area of choice during frame and focusing.

Unfortunately, I'm getting the streaking with the new drivers. I'll post on the QHY8 group and see what happens! Update: Using the '512' drivers eliminated the problem!


Streaks from QHY8 Flat with '1024' drivers..

Found this: http://qhyccd.com/ccdbbs/index.php?topic=1388.0

Old discussion: I ran into the streaking problem some users experience when using the stock drivers. This seems to be caused by a failure to handle activity or delays on the USB bus while downloading an image from the camera. Some users have this problem and others don't. (There is a posting on the qhyccd.com site that discusses this problem and shows some code that fixes it.) Fortunately, for me this problem does not exist when using Tom's libusb drivers. Summing up, what I have found is that Tom's drivers with Nebulosity 2.0.6 is working well and that's what I would recommend to others. The nuance is that you need to select a different camera in Nebulosity based on which drivers you use.

Still earlier, outdated notes: I'm initially began using the 'stock' drivers and 'Nebulosity' software (v2.03b) to capture images with great success. I tried the 'beta drivers' and found the fine focus function did not work. (Others have reported this issue does not exist with later versions of Nebulosity and I am working fine with Nebulosity 2.0.6. I have also determined the fine focus does not work for exposures of .1 sec. or less; this may have been the problem all along.) I also had an initial issue with the camera where it captured completely black images. This turned out to be caused by the 'S-VHS style' cable not being plugged into the camera completely.

Do Not Mix Driver Output: I have found that images output from one version of the drivers versus the other are not compatible in Nebulosity when using Raw processing.

Mounting a camera lens to the QHY8: I bought an SBIG Nikon lens adaptor (SBIG CLA-7 for Nikon, part SB-CLA7NK at OPT). It did not come to focus with my 18mm Nikon lens, but did with my 55mm Nikon micro lens. I would like to hear about other's experiences with mounting camera lenses to the QHY8, email me here.

Camera details: (RL -> Distance from chip to surface to front of camera is 21mm) It is a large-format (APS-size) one-shot color camera with a 28mm diagonal chip size. Some info: * Total pixel: 3110 x 2030 * Active pixels: 3032 x 2016 * Pixel Size: 7.8um x 7.8um square * Color method: RGB BAYER film on CCD * D50 -> Standard DX size (23.7 x 15.6 mm)

Effective sensor area: 28.4 mm diagonal * Readout noise: 8-12 e @600 Kpixel/s * QE: 60% at green (Peak), 50% at blue and H-alpha * Microlensing on chip * Progressive Scan * ABG: -110dB * 16bit ADC with CDS and Preamp * USB2.0 High Speed interface * T-thread mounting * Rugged custom-fit Pelican carrying case * Includes both AC and 12v DC adapters * Dimensions: 3.5' x 3.5' x 2.25' * Weight: 1.2 lbs.(0.55 kg). Additional info on the camera experience (astro geek ramblings): I've had a few struggles getting used to the camera and the new capture/processing methods associated with a CCD. I have upgraded from DSLR Astro-imaging, but have a lot of image processing experience. So far I'm finding the 'out of the camera' colors are more muted out of the CCD vs my DSLR, due to the use of 'raw' processing I think, with the associated need for extreme stretching. Out of the Canon DSLRs, I would do a non-linear stretch out of ImagesPlus and start with a more colorful image. The bottom line is it took 3 deep-dive processing exercises to get a PacMan version I liked.

For more info on this camera go to: http://tech.groups.yahoo.com/group/QHYCCD/ and http://qhyccd.com/QHY8.html/ [2015 link removed]

By way of comparison, here's the info on my Canon 20D, 20Da DSLR:

Canon 20Da has 6.4 micron pixels (and diagonal is 27mm assuming 15*22.5 sensor size)
arc sec per pixel = 1.31 at 1000 mm
arc sec per pixel = 1.88 at 700 mm
1000 mm = 39 inches focal length

The Canon 20D's 8 megapixel sensor has a 1.6 crop factor and a sensor size of 15X22.5mm. The sensor is about .89 inches wide with resolution of 3504 x 2336 pixels. Dividing the width resolution by the width of the sensor in inches shows us that we have about 3937 ppi on this camera's sensor.

Here's a post to the Yahoo digital_astro group comparing the QHY8 with a DSLR:

In my experience with both a DSLR (Canon 20Da, original and then 'Hap modified') and QHY8 CCD camera, darks are much less of an issue with the QHY8. I have found that it's very important to take contemporaneous darks with the DSLR. Especially on nights where there are significant temperature changes this is a major problem. This issue isn't just ambient temp, but also the camera's internal temps and I think the orientation can also play role, as can swapping a 'warm' CF card with a cold one. Plus, my DSLR gets an amp glow thing going when temps get down to around freezing, green is out of control on warm nights, and the dark river thing is maddening. For best results I would spend time taking darks at night every 60-120 minutes, bottom line.

With the QHY8 I just built up a library of 'warm' and 'cold' darks, and use Nebulosity's 'bad pixel' function. The camera is not free of noise but it is far and away easier to deal with than with the DSLR.

This is not to say you can't achieve excellent results with a DSLR. I just find it easier with the QHY8. See more thoughts on the bottom of my Canon 20Da Page.

Post on flats1

Drivers Qhy Ccd

Message #2961 of 2969 < Prev | Next > Re: Flats and Bias check

I've found getting good flats is a major challenge. If you're just shooting galaxies or 'small' objects its not that big a deal as you can always use something like gradientXterminator to correct everything (or just crop.) But for big nebulae flat is good. See message 1434 in this group for a discussion that would imply your flats are too bright and getting into the non-linear range of camera. I found I had much better results targeting 12-15K avg for my flats (as I recall, can't check right this minute.) I use nebulosity to calibrate and results may vary with other software.

Ccd

If I follow one of your concerns, after you calibrate a frame the overall level or your real exposures will drop as you subtract your bias. That's normal and good. You stretch the image from there.

-Dick Locke

App

Post on flats2

Message #2964 of 2969 < Prev | Next > Re: Flats for OSC cameras

Per my other message, I think 32K is too high for flats with the QHY8. For reference, I'm using Tom's drivers with default gain/offset. I think you want to keep it to less than 20K. If someone else has more specific advice or findings around the optimal exposure for flats please speak up ;-)

In terms of making the flats, I do t-shirt flats and/or sky flats.

If you do t-shirt flats on a clear day you can experiment easily with different exposures. Do a set at 10K, a set at 20K, a set at 30K, then test against your astro shots and see what's best. T-shirt flats are at once easy, but tricky. Easy in that you just need a clear day, but tricky because the camera isn't 100% light tight and also you need to make sure the sun isn't hitting any part of the t-shirt. Plx network & wireless cards drivers. I rigged up a shroud to shelter the camera from direct light, and another thing to block the sun from hitting the t-shirt.

Flats at dusk are tricky because first of all it has to be reasonably dark before you can get flat's that are dim enough, and then the light is changing so rapidly you need to adjust the exposure time with every few images to maintain the exposure target you're looking for. Then, of course, you start picking up stars. I rotate the camera or move the scope between each flat exposure and do a median combine on the flats to average out the stars.

Qhyccd Polemaster Drivers

If you have time, I believe it is best to do sky flats as it gets dark. Then test, and see if these flats are better than your t-shirt flats, and go from there. Keep your sensor free from dust and you'll build up a library of flats you can re-use.

In terms of overall workflow, just follow the steps suggested in the Nebulosity manual, they work well.

Here's a post on the yahoo group about power adapters:

Re: Still not clear on DC power question for QHY8

Dan,
Thanks for all the info. Today I ended up getting a $10 radio shack
solution consisting of
'DC Power Cord With Adaptaplug Outlet (Lighter Socket) (includes one
free adaptaplug) & Adaptaplug 'M' 5.5mm OD and 2.1mm ID.
I tested it and it seems to work well. And I checked the polarity 3
times before plugging it in ;-) The Power Cord is rated to 5 amps
and is 8 feet long and fuse protected. The cord is labeled 300V 18awgx2f.
The plug itself is slightly longer than it needs to be so it's not
perfect, but it certainly should be good enough as a 'run from DC
directly' option.
-Dick Locke
--- In QHYCCD@yahoogroups.com, Dan <dholler01@..> wrote:
>
> Hello Dick,
>
> It's not so much the half mm on the outside as it the post on middle,
> the diameter of that post is pretty critical. Also, some of the
> connectors are longer or shorter, but, with the same post OD / ID. Some
> of mind do seem a bit more loose than others. Trouble is, I got some
> that are the correct size and some that aren't:-)
>
> Here's a table which may help on the 18AWG.
>
> http://www.powerstream.com/Wire_Size.htm
>
> It sounds pretty reasonable to me. Unless you really wrap it inside a
> tube with other wires, it should be fine. Power = Amperage squared x
> the wire resistance. Even if that short length were one ohm of
> resistance (which it isn't), and, if the amperage drawn were 5 amps, the
> thing would only be using about 25 watts. The wattage dissipated over
> the several feet of space in an outside environment, should be no
> problem. Might make a good dew heater, but seriously, I don't even
> think it represents close to even 1 watt per foot of length. But hey,
> wire is cheap for that length.
>
> Where the real trouble comes is connectors. Today, most use inferior
> materials (tin instead of silver or gold), thin plating (thin tin at
> that), and minimal surfaces. This can quickly generate a high
> resistance pathway. Now you're talking wasted power as heat. Sander is
> correct, solder is good. I like old binding posts myself, but, you can
> tin on some solder to the outside of the male connector, if you don't
> like soldering it. Get that .5 mm, just be careful not to over do it
> and melt the whole thing.
>
> Best wishes,
> Dan
>
>
>
>
> On Wed, 2008-09-24 at 01:49 +0000, dtlnew wrote:
> > Thanks.
> >
> > As best as I can tell the 'stock' connector is 5.5mm OD and 2.1mm ID.
> > Is your 'K' connector at all loose? I expect maybe multiple sizes
> > can work if you're just talking about .5mm. The QHYccd site just
> > mentions 2.1mm ID and not an OD as far as I can tell.
> >
> > The other challenge is mating the tip with wire than can handle ~5
> > amps. I don't think 18awg is good enough.
> >
> > -Dick
> >
> > --- In QHYCCD@yahoogroups.com, Dan <dholler01@> wrote:
> > >
> > > Dick,
> > >
> > > I'm using size K connectors here. 5mm OD and 2.1mm ID. But
check on the
> > > QHYccd site, its there if you search for it.
> > >
> > > Maybe one of the others can confirm thats the exact one.
> > >
> > > Best wishes,
> > > Dan
> > >
> > > On Tue, 2008-09-23 at 02:27 +0000, dtlnew wrote:
> > > > All, I want to get back to running a QHY8 without AC power, and
> > > > clarify the remaining question I have. To review, my
Starzonia camera
> > > > has a HU-120660 (AC to DC) box feeding DC into the 'QHYCCD' box
> > DC-101.
> > > >
> > > > What I would like to do is run the DC-101 directly from a battery,
> > > > without plugging into AC power at all. The main issue I have is
> > > > finding a compatible tip/ring type connector. I have some
radio shack
> > > > tips and they don't seem to match the DC-101's connector exactly.
> > > > Can anyone advise of a successful DC only input cable/tip/ring
> > > > connector to power the DC-101 box?
> > > >
> > > > Thanks in advance for any help or pointers.

Qhy Ccd Drivers

Astronomy and Camera Equipment

You want to buy a telescope?

Drivers Qhy Ccd Cameras

Old Scope Setup

Dick Locke's DL-DIGITAL web site

Drivers Qhy Ccd

Astronomy Pictures: Dick Locke's Astrophoto Gateway page..